新聞資訊

【中英表】英國接頭標準(BS joint standards)

發布日期：2017-06-29 閱讀量： 304 次

編號	中文名稱	英文名稱
BS 1560-3.2-1989	管子,、閥門和接頭(規定等級)用圓法蘭.第3部分:鋼、鑄鐵和銅合金法蘭.第2節:鑄鐵法蘭規范	Circular flanges for pipes, valves and fittings (Class designated) - Steel, cast iron and copper alloy flanges - Specification for cast iron flanges
BS 1782-1951	消防軟管接頭除外的吸入軟管和送水軟管接頭(1.5英寸至8英寸標稱尺寸)規范	Specification for couplings for suction and delivery hose (11/2 in. to 8 in. nominal sizes) other than fire hose couplings
BS 1906-1952	(標稱尺寸1/8英寸-1/4英寸）軟管接頭(露天和水中使用)規范	Specification for hose couplings (air and water) (1/8 in. to 11/4 in. nominal sizes)
BS 2051-1-1973	工程用管與管接頭規范.第1部分:工程用銅與銅合金毛細管與耐壓管接頭	Tube and pipe fittings for engineering purposes - Copper and copper alloys capillary and compression tube fittings for engineering purposes
BS 2051-2-1984	工程用管與管接頭規范.第2部分:橄欖型銅合金耐壓管接頭	Tube and pipe fittings for engineering purposes - Specification for olive type copper alloy compression tube fittings
BS 2464-1954	汽油、石油和潤滑劑用軟管接頭(標稱尺寸 1/4英寸至 4英寸)規范	Specification for hose couplings for petrol, oil and lubricants (3/4 in. to 4 in. nominal sizes)
BS 2464-2-1969	石油,、汽油和潤滑油用軟管接頭規范.第2部分:高壓接頭	Specification for hose couplings for petrol, oil and lubricants - High pressure couplings
BS 2464-3-1968	汽油,、石油和潤滑劑用軟管接頭規范.第3部分:快速接頭	Specification for hose couplings for petrol, oil and lubricants - Quick-acting couplings
BS 2464-4-1980	汽油,、石油和潤滑劑用軟管接頭規范.第4部分:歐洲型 100mm快速接頭規范	Hose couplings for petrol, oil and lubricants - Specification for 100 mm quick-acting couplings: European type
BS 2761-1983	球面接頭規范	Specification for spherical ground joints
BS 2782-11 Method 1108A-1989	塑料試驗方法.第11部分:熱塑性塑料管,、接頭和閥門.試驗方法1108A:管界面限定碰撞率	Methods of testing plastics - Thermoplastics pipes, fittings and valves - True impact rate (TIR) boundaries of pipes
BS 2782-11 Method 1109A-1989	塑料試驗方法.第11部分:熱塑性塑料,、接頭和閥門.試驗方法1109A:非承壓聚乙烯管和接頭耐壞境應力開裂性	Methods of testing plastics - Thermoplastics pipes, fittings and valves - Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications
BS 2782-11 Method 1121B-1997	塑料的試驗方法.第11部分:熱塑管,、接頭和閥門.流體輸送用熱塑管.試驗方法1121B:額定外部直徑和額定壓力.米	Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Metric series
BS 2782-11 Method 1121C-1997	塑料試驗方法.第11部分:熱塑管,、接頭和閥門.流體輸送用熱塑管.試驗方法1121C:額定外部直徑和額定壓力.英尺	Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Inch-based series
BS 2782-11 Method 1121H-1996	塑料試驗方法.第11部分:熱塑性塑料管、接頭和閥門.試驗方法1121H:非承壓液體輸送熱塑性塑料管.管頭損失計算	Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the transport of liquids under pressure - Calculation of head losses
BS 2C 4-1973	飛機發動機制冷劑壓力灌注接頭尺寸規范	Specification for coupling dimensions for aero-engine refrigerant pressure replenishment connections
BS 2C 5-1976	液氧灌注連接頭配合尺寸規范	Specification for mating dimensions for liquid oxygen replenishment couplings
BS 2M 53-1997	飛機.液壓系統.管道和管接頭熱沖擊試驗	Aircraft - Fluid systems - Thermal shock testing of piping and fittings
BS 2SP 101-104-1956	飛行器用旋轉套筒,、張力傳動桿和旋壓鋼索端部接頭(統一螺紋)規范	Specifications for turnbarrels, tension rods and swaged cable-end connections (Unified threads) for aircraft
BS 2SP 7-1943	飛機材料規范.叉形接頭(高強度型)(尺寸號 4B.A.至<1/4>英寸B.S.F	Specification for aircraft material - Fork joints (high tensile type) (for sizes No. 4 B.A. to 3/4 inch B.S.F. inclusive)
BS 31-1940	電氣布線用鋼導線管和管接頭	Specification - Steel conduit and fittings for electrical wiring
BS 3288-3-1989	架空電力導線絕緣和導線接頭.第3部分:絕緣子組件球窩連接接頭尺寸	Insulator and conductor fittings for overhead power lines - Dimensions of ball and socket couplings of string insulator units
BS 336-1989	消防軟管接頭與輔助設備的規范	Specification for fire hose couplings and ancillary equipment
BS 341-3-2002	可運輸氣體容器的閥門.閥門出口接頭	Transportable gas container valves - Valve outlet connections
BS 3799-1974	石油工業用鋼管配件,、螺旋管接頭和套管焊接規范	Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry
BS 3818-1964	柴油機車及有軌內燃機車自動密封加油接頭規范	Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars
BS 3SP 3-1943	飛機材料規范.叉形接頭(低強度型)(尺寸自N0.4B.A至<1/2>英寸B.S.F.)	Specification for aircraft material - Fork joints (low tensile type) (for sizes No. 4 B.A. to 1/2 inch B.S.F. inclusive)
BS 4222-1967	牙科手持機的傳動聯軸器(滑配接頭)尺寸規范	Specification for dimensions of the transmission coupling (slip-joint) to dental handpieces
BS 4368-4-1984	液壓和通用壓合管接頭.第4部分:型號試驗要求規范	Metallic tube connectors for fluid power and general use - Specification for type test requirements
BS 4568-1-1970	電氣裝置用ISO型米制螺紋鋼導管及接頭規范.第1部分:鋼導管、彎頭和接頭	Specification for steel conduit and fittings with metric threads of ISO form for electrical installations - Steel conduit, bends and couplers
BS 4579-2-1973	電纜和電線連接器機械和壓合接頭性能規范.第2部分:鎳,、鐵及鍍銅導線壓合接頭	Specification for performance of mechanical and compression joints in electric cable and wire connectors - Compression joints in nickel, iron and plated copper conductors
BS 4607-1-1984	電氣裝置用非金屬導管及接頭規范.第1部分:絕緣材料接頭和元件規范	Non-metallic conduits and fittings for electrical installations - Specification for fittings and components of insulating material
BS 4607-5-1982	電氣裝置用非金屬導管及接頭規范.第5部分:絕緣材料剛性導管,、接頭和元件規范	Non-metallic conduits and fittings for electrical installations - Specification for rigid conduits, fittings and components of insulating material
BS 4622-1970	灰口鐵管和管接頭規范	Specification for grey iron pipes and fittings
BS 4742-4-1985	農用機械液壓設備.第4部分:掛車和機具用制動系統用液壓管接頭規范	Hydraulic equipment for agricultural machinery - Specification for hydraulic couplings on braking systems for trailers and trailed equipment
BS 4742-7-1989	農用機械液壓設備.第7部分:農用拖掛車輛液壓制動系統管接頭用油口連接規范	Hydraulic equipment for agricultural machinery - Specification for port connections for agricultural trailed vehicle hydraulic brake couplings
BS 4871-3-1985	按認可焊接工藝操作的焊工鑒定考試規范.第3部分:金屬管與管板接頭間電弧焊	Specification for approval testing of welders working to approved welding procedures - Arc welding of tube to tube-plate joints in metallic materials
BS 4G 178-2-1986	飛機電纜電線壓接頭.第2部分:壓接檢驗規范(包括用戶檢驗試驗)	Crimped joints for aircraft electrical cables and wires - Specification for control of crimping (including user control tests)
BS 5200-1997	水管接頭和轉接器的尺寸規范	Specification for dimensions of hydraulic connectors and adaptors
BS 534-1990	水和污水用鋼管接頭和異型管件規范	Specification for steel pipes, joints and specials for water and sewage
BS 5529-1988	工業用低壓開關設備和控制裝置規范.A型、直流用,、3或4個接頭的近距離電感開關	Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form A, for direct current, 3 or 4 terminals
BS 5611-1978	負載分接頭切換開關應用指南	Application guide for on-load tap-changers
BS 5649-5-1982	路燈桿規范.第5部分:電氣接頭底座與電線敷設槽規范	Lighting columns - Specification for base compartments and cableways
BS 572-1985	互換式錐形毛玻璃接頭規范	Specification for interchangeable conical ground glass joints
BS 5911-1-2002	預制混凝土管,、管配件和輔助制品.具有軟接頭的非加筋、加筋混凝土管(包括套管)和管配件規范(對 BS EN 1916:	Concrete pipes and ancillary concrete products - Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints(comnplementary to BSEN 1916:2002)
BS 5911-5-2004	混凝土管和輔助混凝土制品.帶軟接頭的預應力非壓力管道和配件的規范	Concrete pipes and ancillary concrete products - Specification for prestressed non-pressure pipes and fittings with flexible joints
BS 6083-5-1984	助聽器.第5部分:內插式耳機短接管接頭和封閉裝置尺寸規范	Hearing aids - Specification for dimensions of the nipple and sealing device for insert earphones
BS 6102-15-1991	自行車.第15部分:輻條螺紋接頭尺寸規范	Cycles - Specification for dimensions of spoke nipples
BS 6362-1990	按BS21 "帶壓密接合螺紋接頭的管及配件管螺紋" 攻絲的不銹鋼管規范	Specification for stainless steel tubes suitable for screwing in accordance with BS 21 'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads'
BS 6464-1984	制煉廠用增強塑料管,、配件和接頭規范	Specification for reinforced plastics pipes, fittings and joints for process plants
BS 65-1991	只用于地表水管道和配件的陶管,、配件、導管和撓性機械接頭規范	Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings
BS 6537-1984	液壓流體設備用U型接頭規范	Specification for staple type connectors for hydraulic fluid power applications
BS 669-1-1989	燃氣灶具用軟管,、管接頭和承窩接口.第1部分:采用第1,、2類燃氣的家用灶具用帶繞金屬軟管、護罩,、接頭配件和	Flexible hoses, end fittings and sockets for gas burning appliances - Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases
BS 669-2-1997	燃氣灶具用軟管,、接頭和管座.使用第1,、2和3類燃氣的家用灶具波紋金屬軟管、封蓋,、接頭和管座規范	Flexible hoses, end fittings and sockets for gas burning appliances - Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st, 2nd and 3rd family gases
BS 6910-2-1989	電壓范圍為交流1000V和直流1500Vd.c.的低溫澆注樹脂復合物和熱縮電纜接頭.第2部分:現場安裝實用規程	Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation
BS 746-2005+A1-2009	燃氣表活接頭與轉接器用規范	Specification for gas meter unions and adaptors
BS 7677-1993	管道接頭用密封圈缺陷分類推薦標準	Recommendations for classification of imperfections in pipe joint rings
BS 778-1966	液壓用鋼管與接頭規范	Specification for steel pipes and joints for hydraulic purposes
BS 8407-2002	地下用輸送帶機械和疊接接頭的規范	Specification for mechanical and spliced joints in conveyor belting for use underground
BS 864-2-1983	銅和銅合金制毛細管與承壓管配件.銅管用毛細管與壓合接頭規范	Capillary and compression tube fittings of copper and copper alloy. Specification for capillary and compression fittings for copper tubes
BS 9522 N0001-1982	直流和低頻用多觸頭圓形電氣連接件詳細規范,、帶有前面可釋放后面可拆卸的壓接觸點卡口接頭.全面評估級	Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling with front release, rear removable crimp contacts - Full assessment level
BS 9522 N0003-1990	直流和低頻用多觸點圓形電氣連接器詳細規范.帶后可插入,、后釋放,、后可拆卸壓接觸點的無檔板密封、耐環境影	Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling non-barrier sealed, environment resistant with rear insertable, rear release, rear removable crimp contacts also barrier sealed with non-removable solder contact styles - Full plus airframe fit assessment
BS A 358-3-2000	MJ螺紋.流體系統用的接頭的極限尺寸	MJ threads - Limit dimensions for fittings for fluid systems
BS AU 91-1965	起動蓄電池圓錐形接線端子的電纜接頭尺寸(用正極接地部件的汽車和輕便商用汽車)規范	Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system)
BS DD CEN/TS 1591-3-2007	法蘭及其連接件.墊圈的圓形法蘭連接件用設計原則.第3部分:金屬與金屬接點之間的法蘭接頭的計算方法	Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint
BS DD CEN/TS 1591-4-2007	法蘭及其連接件.墊圈的圓形法蘭連接件用設計原則.第4部分:服從壓力設備指令,、符合設備螺栓接頭裝配要求的人	Flanges and their joints — Design rules for gasketed circular flange connections — Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
BS EN 10253-1-1999	對接焊管道接頭.通用和無特殊檢驗要求的鍛制碳鋼	Butt-welding pipe fittings - Wrought carbon steel for general use and without specific inspection requirements
BS EN 10253-2-2007	對接焊管道接頭.帶特殊檢驗要求的非合金和鐵素體合金鋼	Butt-welding pipe fittings — Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
BS EN 10253-3-2008	對焊管接頭.無特殊檢驗要求的鍛制奧氏體和奧氏體-鐵素體(二相)不銹鋼	Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
BS EN 10253-4-2008	對焊管道接頭.具有特殊檢驗要求的鍛制奧氏體和鐵素體－奧氏體(二相)不銹鋼	Butt-welding pipe fittings - Part 4:Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
BS EN 10311-2005	水和其他含水液體傳送用鋼管和配件的連接用接頭	Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
BS EN 1075-2000	木結構.試驗方法.由沖打孔金屬板緊固件構成的接頭	Timber structures - Test methods - Joints made with punched metal plate fasteners
BS EN 1092-2-1997	法蘭及其連接.按PN標注的管,、閥門,、管接頭和附件的圓形安裝法蘭.第2部分:鑄鐵法蘭	Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Cast iron flanges
BS EN 12308-1998	液化天然氣設施和設備.用于液化天然氣管道的法蘭接頭墊圈設計適配性試驗	Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping
BS EN 12316-1-2000	防水柔性板.接頭抗剝離性的測定.屋頂防水瀝青板	Flexible sheets for waterproofing - Determination of peel resistance of joints - Bitumen sheets for roof waterproofing
BS EN 12316-2-2000	防水柔性板.接頭抗剝離性的測定.屋頂防水用塑料和橡膠薄板	Flexible sheets for waterproofing - Determination of peel resistance of joints - Plastic and rubber sheets for roof waterproofing
BS EN 12317-1-2000	防水柔性板.屋頂防水瀝青板.接頭抗剪切性的測定	Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of shear resistance of joints
BS EN 12512-2001	木結構.試驗方法.機械緊固件接頭的周期測試	Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners
BS EN 12517-2-2008	焊縫的無損檢驗.通過射線照相術評估鋁及鋁合金的焊接接頭.驗收等級	Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels
BS EN 1254-1-1998	銅和銅合金.管路接頭.銅管毛細管釬焊法或銅焊法用端頭接頭	Copper and copper alloys - Plumbing fittings - Fittings with ends for capillary soldering or capillary brazing to copper tubes
BS EN 1254-2-1998	銅和銅合金.管路接頭.與銅管一起使用的壓合接頭	Copper and copper alloys - Plumbing fittings - Fittings with compression ends for use with copper tubes
BS EN 1254-3-1998	銅和銅合金.管路接頭.與塑料管一起使用的壓合接頭	Copper and copper alloys - Plumbing fittings - Fittings with compression ends for use with plastics pipes
BS EN 1254-4-1998	銅和銅合金.管路接頭.與帶有毛細管或壓力端頭的其它端頭連接的管接頭	Copper and copper alloys - Plumbing fittings - Fittings combining other end connections with capillary or compression ends
BS EN 1254-5-1998	銅和銅合金.管路接頭.銅管毛細管銅焊法用短端頭接頭	Copper and copper alloys - Plumbing fittings - Fittings with short ends for capillary brazing to copper tubes
BS EN 12560-1-2001	法蘭及其接頭.標示等級的法蘭襯墊.有或無插孔的非金屬水平襯墊	Flanges and their joints - Gaskets for Class-designated flanges - Non-metallic flat gaskets with or without inserts
BS EN 12560-2-2001	法蘭及其接頭.標示等級的法蘭襯墊.鋼法蘭用螺旋纏繞襯墊	Flanges and their joints - Gaskets for Class-designated flanges - Spiral wound gaskets for use with steel flanges
BS EN 12560-3-2001	法蘭及其接頭.標示等級的法蘭襯墊.非金屬PTFE外殼襯墊	Flanges and their joints - Gaskets for Class-designated flanges - Non-metallic PTFE envelope gaskets
BS EN 12560-4-2001	法蘭及其接頭.標示等級的法蘭的襯墊.鋼法蘭用波紋狀、水平或皺縮金屬和填充金屬襯墊	Flanges and their joints - Gaskets for Class-designated flanges - Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
BS EN 12560-5-2001	法蘭及其接頭.標示等級的法蘭的襯墊.鋼法蘭用金屬環接頭襯墊	Flanges and their joints - Gaskets for Class-designated flanges - Metallic ring joint gaskets for use with steel flanges
BS EN 12560-7-2004	法蘭及其接頭.分級標示法蘭用墊圈.鋼法蘭用涂覆金屬的套層墊圈	Flanges and their joints - Gaskets for class-designated flanges - Covered metal jacketed gaskets for use with steel flanges
BS EN 12573-4-2000	焊接非靜壓熱塑罐.法蘭接頭的設計和計算	Welded static non-pressurized thermoplastic tanks - Design and calculation of flanged joints
BS EN 1277-2004	塑料管道系統.地下無壓用熱塑性管道系統.彈性密封環型接頭密封性的試驗方法	Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
BS EN 12797-2000	銅焊.銅焊接頭破壞試驗	Brazing - Destructive tests of brazed joints
BS EN 12799-2000	銅焊.銅焊接頭無損檢驗	Brazing - Non-destructive examination of brazed joints
BS EN 12814-1-2000	熱塑性半成品焊接接頭試驗.彎曲試驗	Testing of welded joints of thermoplastics semi-finished products - Bend test
BS EN 12814-2-2000	熱塑半成品焊接接頭試驗.拉伸試驗	Testing of welded joints of thermoplastics semi-finished products - Tensile test
BS EN 12814-3-2000	熱塑半成品焊接接頭試驗.拉伸蠕變試驗	Testing of welded joints of thermoplastics semi-finished products - Tensile creep test
BS EN 12814-4-2001	熱塑半成品焊接接頭試驗.剝離試驗	Testing of welded joints of thermoplastics semi-finished products - Peel test
BS EN 12814-5-2000	熱塑半成品焊接接頭試驗.宏觀檢查	Testing of welded joints of thermoplastics semi-finished products - Macroscopic examination
BS EN 12814-6-2000	熱塑半成品焊接接頭試驗.低溫拉伸試驗	Testing of welded joints of thermoplastics semi-finished products - Low temperature tensile test
BS EN 12814-7-2002	熱塑性半成品的焊接接頭的試驗.腰形試驗樣品的拉伸試驗	Testing of welded joints of thermoplastics semi-finished products - Tensile test with waisted test specimens
BS EN 12814-8-2001	熱塑半成品焊接接頭試驗.要求	Testing of welded joints of thermoplastic semi-finished products -. Requirements
BS EN 13090-2000	建筑物內氣體管道的螺紋接頭重新密封方法	Means for resealing threaded joints of gas pipework in buildings
BS EN 13100-1-2000	熱塑性半成品焊接接頭無損檢驗.目視檢查	Non destructive testing of welded joints of thermoplastics semi-finished products - Visual examination
BS EN 13100-2-2004	熱塑性半成品焊接接頭的無損檢驗.X射線照相檢驗	Non destrictive testing of welded joints of thermoplastics semi-finished products - X-ray radiographic testing
BS EN 13100-3-2004	熱塑性半成品焊接接頭的無損檢驗.超聲檢驗	Non-destructive testing of welded joints in thermoplastics semi-finished products - Ultrasonic testing
BS EN 13271-2002	木材緊固件.連接器接頭的特征載荷能力和滑脫系數	Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints
BS EN 14257-2006	粘合劑.木材粘合劑.溫度升高時搭接接頭拉伸強度的測定(WATT '91)	Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
BS EN 14258-2004	結構粘合劑.短期或長期暴露于特定溫度條件下的粘合接頭的機械性能	Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
BS EN 1435-1997	焊縫的無損檢驗.焊接接頭的放射性檢驗	Non-destructive examination of welds - Radiographic examination of welded joints
BS EN 144-3-2003	呼吸保護裝置.氣瓶閥.潛水用Nitrox和氧氣氣瓶的出口接頭	Respiratory protective devices - Gas cylinder valves - Outlet connections for diving gases Nitrox and oxygen
BS EN 14454-2005	防飲用水回流污染的裝置.軟管接頭防回流裝置DN 15～DN 32.A型H系列	Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 inclusive - Family H, type A
BS EN 14525-2005	不同材料管道用球墨鑄鐵大公差聯接器和法蘭接頭:球墨鑄鐵,、灰鑄鐵,、鋼、PVC-U,、PE和纖維水泥	Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
BS EN 14741-2006	熱塑管和管道系統.非壓力掩埋用接頭.通過評估密封壓力測定彈性密封件接合處的長期密封性能的試驗方法	Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
BS EN 15096-2008	防飲用水回流污染用裝置.軟管接頭防真空閥.包括B型和D型H系列的DN 15～DN 25.通用技術規范	Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D. General technical specification
BS EN 1515-1-2000	法蘭及其接頭.螺栓連接.螺栓連接的選擇	Flanges and their joints - Bolting - Selection of bolting
BS EN 15617-2009	焊接接頭的無損檢驗.飛行時間衍射技術(TOFD).接受等級	Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
BS EN 1591-2-2008	法蘭及其接頭.帶襯墊的環形法蘭連接件的設計規則.墊圈參數	Flanges and their joints - Design rules for gasketed circular flange connections - Part 2:Gasket parameters
BS EN 1741-1998	帶有開放結構的蒸氣加氣混凝土或輕集料混凝土預制構件之間接頭處非平面方向抗剪切強度的測定	Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
BS EN 175201-804-2000	電子元器件質量評定協調系統.詳細規范.環形連接器.螺紋接頭直徑1.6mm圓觸點	Harmonized system of quality assessment for electronic components - Detail specification - Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling
BS EN 1829-2-2008	高壓噴水機器.安全要求.軟管,、軟管管路和接頭	High-pressure water jet machines — Safety requirements — Part 2: Hoses, hose lines and connectors
BS EN 1993-1-8-2005	歐洲法規3.鋼結構的設計.接頭設計	Eurocode 3: Design of steel structures - Part 1-8: Design of joints
BS EN 205-2003	膠粘劑.非結構用木材粘結劑.搭接接頭拉力剪切強度的測量	Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints
BS EN 21089-1992	點焊設備用電極錐度接頭.尺寸	Electrode taper fits for spot welding equipment - Dimensions
BS EN 2591-217-2002	電氣和光學連接元件.試驗方法.終端接線片和連機拼合接頭在規定電流下的電壓降	Elements of electrical and optical connection - Test methods - Voltage drop under specified current for terminal lugs and in-line splices
BS EN 2591-218-2002	電氣和光學連接元件.試驗方法.用溫度和電流循環法試驗終端接線片和連機拼合接頭的衰老程度	Elements of electrical and optical connection - Test methods - Ageing of terminal lugs and in-line splices by temperature and current cycling
BS EN 2591-219-2002	電器和光學連接元件.試驗方法.絕緣終端接線片和連機拼合接頭的電壓強度	Elements of electrical and optical connection - Test methods - Voltage strength for insulated terminal lugs and in-line splices
BS EN 2591-220-2005	航空航天系列.電和光學連接元件.試驗方法.電流和溫度周期性變化引起的觸點/導體接頭老化	Elements of electrical and optical connection — Test methods — Part 220: Contact/conductor joint ageing by current and temperature cycling
BS EN 2665-003-1999	額定電流為20A至50A的溫度補償?shù)娜龢O電路斷路器.米制螺紋接頭.產品標準	Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals - Product standard
BS EN 2665-004-1999	額定電流為20A至50A的溫度補償?shù)娜龢O電路斷路器.UNC螺紋接頭.產品標準	Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals - Product standard
BS EN 26891-1991	木結構.機械緊固件接頭.強度和變形特性測定一般原則	Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics
BS EN 2794-003-1999	額定電流為20A至50A的溫度補償?shù)膯螛O電路斷路器.米制螺紋接頭.產品標準	Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals - Product standard
BS EN 2794-004-1999	額定電流為20A至50A的溫度補償?shù)膯螛O電路斷路器.UNC螺紋接頭.產品標準	Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals - Product standard
BS EN 28430-1-1992	點焊設備規程.電極夾具.第1部分:錐形接頭錐度1:10	Specification for resistance spot welding - Electrode holders - Taper fixing 1:10
BS EN 28430-2-1992	點焊設備規程.電極夾具.第2部分:莫氏錐形接頭	Specification for resistance spot welding - Electrode holders - Morse taper fixing
BS EN 28970-1991	木結構.用機械緊固件連接的接頭試驗.木材致密度要求	Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density
BS EN 295-1-1991	排水管和下水道用陶管和管配件及管接頭.要求	Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements
BS EN 295-2-1991	排水管和下水道用陶管和管配件及管接頭.質量控制和抽樣	Vitrified clay pipes and fittings and pipe joints for drains and sewers - Quality control and sampling
BS EN 295-3-1991	排水管和下水道用陶管和管配件及管接頭.試驗方法	Vitrified clay pipes and fittings and pipe joints for drains and sewers - Test methods
BS EN 295-4-1995	排水管和下水道用陶制管和管配件及管接頭.專用配件、管接頭和配套附件的要求	Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for special fittings, adaptors and compatible accessories
BS EN 295-5-1994	排水管和下水道用陶管和管配件及管接頭.帶孔的陶管及配件的要求	Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for perforated vitrified clay pipes and fittings
BS EN 295-6-1996	排水管和污水管用陶制管,、管件及管接頭.陶制管人孔的要求	Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay manholes
BS EN 295-7-1996	排水管和污水管用陶制管,、管件及管接頭.陶制管和管插接接頭的要求	Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay pipes and joints for pipe jacking
BS EN 3079-2006	8°30'壓力＜28000kPa的導管接頭.適配器.米制系列.技術規范	Pipe coupling 8 °30' up to 28000 kPa - Adaptors - Metric series - Technical specification
BS EN 3082-2001	航空航天系列.鈦合金管連接件8°30'.修理用悶頭焊接活接頭	Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead welded, for repair
BS EN 3083-2001	航空航天系列.鈦合金管連接件8°30'.修理用悶頭長焊接端頭活接頭	Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long welded end, for repair
BS EN 3084-2001	航空航天系列.鈦合金管連接件8°30'.修理用焊接端頭螺紋活接頭	Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, welded end threaded for repair
BS EN 3244-2001	航空航天系列.鈦合金8°30’管連接件.雙端頭的活接頭	Aerospace Series - Pipe coupling 8 °30' in titanium alloy - Unions, double ended
BS EN 3245-2001	航空航天系列.鈦合金8°30'管連接件.變徑活接頭	Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, reducer
BS EN 3246-2001	航空航天系列.鈦合金8°30' 管連接件.、悶頭活接頭	Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead
BS EN 3247-2001	航空航天系列.鈦合金8°30'管連接件.悶頭焊接端活接頭,、	Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead welded end
BS EN 3248-2001	航空航天系列.鈦合金管連接件8°30’.帶鎖緊裝置的縮徑管端的轉接頭	Aerospace series - Pipe coupling 8 °30' in titanium alloy - Adaptors, reduced pipe end, with lockring
BS EN 3373-001-2007	航空航天系列.電導體壓接用終端盒和內嵌式接頭.第001部分:技術規范	Aerospace series — Terminal lugs and in-line splices for crimping on electric conductors — Part 001: Technical specification
BS EN 3373-010-2009	航空航天系列.電導體壓接用終端盒和內嵌式接頭.米制和英制螺栓系列用溫度低于150℃銅導體壓接用鍍錫環型終	Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 °C for metric and inch stud series - Product standard
BS EN 3373-011-2009	航空航天系列.電導體壓接用終端盒和內嵌式接頭.米制和英制螺柱系列用溫度小于260℃,、銅導體壓接用鍍鎳環形	Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series - Product standard
BS EN 3373-012-2005	電導體壓接用終端盒和內嵌式接頭.第012部分:溫度小于150℃銅導體壓接用絕緣和密封的內嵌式接頭.產品標準	Terminal lugs and in-line splices for crimping on electric conductors - Part 012: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150 ℃ - Product standard
BS EN 3373-013-2005	電導體壓接用終端盒和內嵌式接頭.第013部分:溫度小于260℃銅導體壓接用絕緣和防潮的內嵌式接頭.產品標準	Terminal lugs and in-line splices for crimping on electric conductors - Part 013: In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260 ℃ - Product standard
BS EN 3566-2001	航空航天系列.鈦合金8°30'管連接件.帶鎖緊裝置的轉接頭	Aerospace series - Pipe coupling 8 °30' in titanium alloy - Adaptor with lockring
BS EN 3690-2001	航空航天系列.鈦合金8°30'管聯接件.長悶頭活接頭	Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long
BS EN 3691-2001	航空航天系列.鈦合金8°30'管連接件.長焊接的悶頭活接頭	Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long welded
BS EN 3773-003-1999	最大轉換容量為65 In/1000 A，額定電流為1A至25A的溫度補償?shù)膯螛O電路斷路器.米制螺紋接頭.產品標準	Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 In/1000 A max - Metric thread terminals - Product standard
BS EN 3773-004-1999	最大轉換容量為65 In/1000 A,，額定電流為1A至25A的溫度補償?shù)膯螛O電路斷路器.UNC螺紋接頭.產品標準	Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 In/1000 A max - UNC thread terminals - Product standard
BS EN 3774-003-1999	轉換容量為65 In,，額定電流為2A至25A的溫度補償?shù)娜夒娐窋嗦菲?米制螺紋接頭.產品標準	Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 In - Metric thread terminals - Product standard
BS EN 3774-004-1999	轉換容量為65 In，額定電流為2A至25A的溫度補償?shù)娜夒娐窋嗦菲?UNC螺紋接頭.產品標準	Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 In - UNC thread terminals - Product standard
BS EN 3852-2002	航空航天系列.TI-P64001型鈦合金制,、球形,、60度管連接器.直螺紋式焊接接頭	Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded
BS EN 3853-2002	航空航天系列.TI-P64001型鈦合金制、球形,、60度管連接器.直活螺紋接頭	Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Straight unions, threaded
BS EN 387-2002	膠合層壓板.大指形接頭.性能要求和最低生產要求	Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements
BS EN 4031-2001	航空航天系列.鈦合金管連接件8°30'.焊接活接頭用螺母	Aerospace series - Pipe coupling 8 °30' in titanium alloy - Nut for welded union
BS EN 4051-2002	航空航天系列.TI-P64001型鈦合金制,、球形、60度管連接器.油口接頭	Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy - Port connection
BS EN 4186-2001	航空航天系列.鈦合金管連接件8°30'.十字形活接頭	Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, cross
BS EN 4233-2001	航空航天系列.鈦合金管連接件8°30'.帶螺紋的焊接活接頭	Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, welded, threaded
BS EN 4552-2003	航空航天系列.耐熱鋼制球面37 管聯接器.端部焊接的直管接頭.英制	Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Straight nipples, welded end - Inch series
BS EN 4553-2003	航空航天系列.耐熱鋼制球面37 管聯接器.端部焊接的90 彎頭管接頭.英制	Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Elbow 90 ° nipples, welded end - Inch series
BS EN 4557-2003	航空航天系列.耐熱鋼制球面37 管聯接器.端部焊接的T形管接頭.英制	Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Tees nipples, welded end - Inch series
BS EN 4610-2005	航空航天系列.8°30'鈦合金管接頭.帶推進線螺母的45°彎頭	Pipe coupling 8°30' in titanium alloy — Elbows 45°, with thrust wire nut
BS EN 50377-2-1-2001	光纖通信系統使用的接頭組件和互連元件.產品規范.接線端設在IEC 60793-2類B1單模纖維上的FC-PC型	Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre
BS EN 512-1995	纖維水泥制品.壓力管道和接頭	Fibre-cement products - Pressure pipes and joints
BS EN 514-2000	制作門窗用未增塑聚氯乙烯(PVC-U)型材.膠結角和T接頭的強度測定	Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T-joints
BS EN 61284-1998	架空線.接頭要求和試驗	Overhead lines - Requirements and tests for fittings
BS EN 61300-2-33-2007	纖維光學互聯裝置和無源部件.基本試驗和測量程序.試驗.光纜接頭盒組裝和拆卸	Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Assembly and disassembly of fibre optic closures
BS EN 61466-1-1997	標稱電壓超過1000V的架空線用復合絕緣子串組合件.標準強度等級和接頭配件	Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V. Standard strength classes and end fittings
BS EN 639-1995	包括接頭和配件的混凝土壓力管的共同要求	Common requirements for concrete pressure pipes including joints and fittings
BS EN 640-1995	鋼筋混凝土壓力管和分布鋼筋混凝土壓力管（非圓柱型）,，包括接頭和配件	Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
BS EN 641-1995	包括接頭和配件的圓柱型加筋混凝土壓力管	Reinforced concrete pressure pipes, cylinder type, including joints and fittings
BS EN 642-1995	包括接頭,、配件和管道預應力鋼特殊要求的圓柱型和非圓柱型預應力混凝土壓力管	Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
BS EN 715-1995	熱塑管道系統.小直徑壓力管和配件間端部負荷軸承接頭.在包含端推力的內部水壓下密封性的試驗方法	Thermoplastics piping systems - End-load-bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust
BS EN 751-1-1997	與第1,2,3類家庭用燃氣和熱水裝置連接的金屬螺紋接頭的密封材料.厭氧密封劑	Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Anaerobic jointing compounds
BS EN 751-2-1997	與第1,2,3類家庭用燃氣和熱水裝置連接的金屬螺紋接頭的密封材料.非硬化密封劑	Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Non-hardening jointing compounds
BS EN 751-3-1997	第1,2,3類家庭用燃氣和熱水裝置連接的金屬螺紋接頭的密封材料.非燒結PTFE密封帶.	Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Unsintered PTFE tapes
BS EN 804-1995	塑料管道系統.壓力管道溶劑膠粘接頭的注射模塑承口連接管件.短期內部液壓壓力的試驗方法	Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
BS EN 846-3-2000	圬工輔助砌塊的試驗方法.預制基地加固處接頭的剪切負載容量的測定	Methods of test for ancillary components for masonry - Determination of shear load capacity of welds in prefabricated bed joint reinforcement
BS EN 877-1999+A1-2006	建筑物中水排放用生鐵管和配件及其接頭和配件.要求、試驗方法和質量保證	Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings — Requirements, test methods and quality assurance
BS EN 911-1996	塑料管道系統.熱塑塑料壓力管道用的彈性密封環型接頭和機械接頭.外部流體靜壓條件下防漏密封試驗方法	Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure
BS EN ISO 10042-2006	焊接.鋁和鋁合金弧焊接頭.缺陷質量分級	Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections
BS EN ISO 10692-2-2001	氣瓶.用于微電子工業的儲氣瓶閥的連接接頭.接到鋼瓶連接接頭上的閥門的定型試驗和規范	Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Specification and type testing for valve to cylinder connections
BS EN ISO 11144-1997	牙科設備.漱口沖洗牙用給排水管接頭	Dental equipment - Connections for supply and waste lines
BS EN ISO 13844-2000	塑料管道系統.與未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯彈性密封環式套筒接頭.負壓下的密封性試驗方法	Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure
BS EN ISO 13845-2000	塑料管道系統.與未增塑聚氯乙烯管一起使用的彈性密封環式套筒接頭.內壓下角度偏轉密封試驗	Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection
BS EN ISO 13846-2001	塑料管道系統.熱塑性壓力管用端負載和無端負載支承組件和接頭.內部水壓下長期密封性的試驗方法	Plastics piping systems - End-load-bearing and non-end-load bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure
BS EN ISO 13919-1-1997	焊接.電子和激光束焊接接頭.缺陷的質量級別導則.鋼	Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Steel
BS EN ISO 13919-2-2001	焊接.電子和激光束焊接接頭.缺陷的質量分級指南.鋁及其可焊合金	Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys
BS EN ISO 14324-2003	電阻點焊.焊接有損試驗.點焊接頭的疲勞試驗方法	Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints
BS EN ISO 15236-4-2004	鋼絲繩運輸帶.硫化的帶接頭	Steel cord conveyor belts - Vulcanized belt joints
BS EN ISO 15245-1-2001	氣瓶.連接儲氣瓶閥門接頭用平行螺紋.規范	Gas cylinders - Parallel threads for connection of valves to gas cylinders - Specification
BS EN ISO 16070-2006	石油和天然氣工業.下降孔設備.鎖緊芯軸和落地螺紋接頭	Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples
BS EN ISO 17659-2004	焊接.帶圖解的焊接接頭的多語種術語	Welding - Multilingual terms for welded joints with illustrations
BS EN ISO 22825-2006	接頭的無損檢驗.超聲波試驗.奧氏體鋼和鎳基合金接頭的試驗	Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
BS EN ISO 4797-2005	實驗室玻璃器皿.錐形磨口接頭燒瓶	Laboratory glassware - Boiling flasks with conical ground joints
BS EN ISO 5356-1-2004	麻醉和呼吸設備.圓錐形接頭.錐體和錐套	Anaesthetic and respiratory equipment - Conical connectors - Cones and sockets
BS EN ISO 5620-1-1997	造船和海上建筑物.飲用水箱注水接頭.總要求	Shipbuilding and marine structures - Filling connection for drinking water tanks - General requirements
BS EN ISO 5620-2-1997	造船和海上建筑物.飲用水箱注水接頭.部件	Shipbuilding and marine structures - Filling connection for drinking water tanks - Components
BS EN ISO 5817-2007	焊接.鋼,、鎳,、鈦和其合金的熔焊接頭(束焊除外).缺陷的質量等級	Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections
BS EN ISO 5828-2001	電阻焊設備.連接水冷接頭的二次接線電纜.尺寸和特性	Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics
BS EN ISO 6149-1-2007	用于液壓傳動和一般用途的管接頭.帶ISO 261米制螺紋和O形密封圈的端口和螺紋端頭.O形密封用平切殼體端口	Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Ports with truncated housing for O-ring seal
BS EN ISO 6149-2-2007	液壓流體傳動和一般用途的管接頭.帶ISO 261米制螺紋和O形密封圈的油口和螺紋端頭.重型(S系列)螺柱端頭的尺	Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Dimensions , design, test methods and requirements for heavy-duty (S series) stud ends
BS EN ISO 6149-3-2007	液壓流體傳動和一般用途的管接頭.帶ISO 261米制螺紋和O形密封圈的油口和螺紋端頭.輕型(L系列)螺柱端頭的尺	Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Dimensions , design, test methods and requirements for light-duty (L series) stud ends
BS EN ISO 8092-1-1998	道路車輛.車上電氣布線線束的連接.單極連接接頭用接線片.尺寸和特殊要求	Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for single-pole connections - Dimensions and specific requirements
BS EN ISO 8434-4-2000	液壓及通用金屬管連接件.有O形面焊接管接頭的24度錐形連接件	Metallic tube connections for fluid power and general use - 24 ° cone connectors with O-ring weld-on nipples
BS EN ISO 9692-2-1998	焊接和相關工藝.接頭的預處理.鋼的埋弧焊	Welding and allied processes - Joint preparation - Submerged arc welding of steels
BS EN ISO 9692-3-2001	焊接和相關工藝.接頭的準備.鋁及其合金的金屬極惰性氣體保護焊和鎢極惰性氣體保護焊	Welding and allied processes - Joint preparation - Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
BS EN ISO 9692-4-2003	焊接和相關工藝.接頭制備.包鋼	Welding and allied processes - Joint preparation - Clad steels
BS ISO 10955-1999	飛行器操縱鋼絲繩用末端接頭和松緊套筒.技術規范	End-fittings and turnbarrels for aircraft control wire rope - Technical specification
BS ISO 12151-2-2003	液壓傳動和通用聯接件.軟管接頭.帶ISO 8434-1和ISO 8434-4 O形圈24錐形末端的軟管接頭	Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ° cone connector ends with O-rings
BS ISO 12151-4-2007	用于液壓流體傳動和一般用途的接頭.軟管配件.帶ISO 6149米制螺柱端頭的軟管配件	Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6149 metric stud ends
BS ISO 12151-5-2007	用于液壓流體傳動和一般用途的接頭.軟管組件.帶ISO 8434-2 37°擴口端的軟管配件	Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-2 37 ° flared ends
BS ISO 13486-1-1999	道路車輛.液壓制動系統.雙擴口管,螺紋孔,外螺紋接頭和管座	Road vehicles - Hydraulic braking systems - Double-flare pipes, tapped holes, male fittings and tube seats
BS ISO 13950-2007	塑料管和管件.電熔合接頭用自動識別系統	Plastics pipes and fittings - Automatic recognition systems for electrofusion joints
BS ISO 13953-2001	聚乙烯管道和配件.根據對焊接頭對試樣的抗拉強度和斷裂模式的測定	Polyethelene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
BS ISO 15509-2001	粘合劑.工程塑料接頭粘合強度測定	Adhesives - Determination of the bond strength of engineering-plastic joints
BS ISO 16422-2006	壓力送水用定向未增塑聚(氯)乙烯(PVC-O)制作的管道和接頭.規范	Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications
BS ISO 22826-2006	金屬材料焊縫的破壞性試驗.激光和電子束焊測定窄接頭硬度的試驗(維氏和努氏硬度試驗)	Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
BS ISO 24497-3-2007	無損檢驗.金屬磁存儲器.焊接接頭的檢驗	Non-destructive testing - Metal magnetic memory - Inspection of welded joints
BS ISO 2974-2005	柴油機.60°錐孔的高壓油管接頭管端部連接	Diesel engines - High-pressure fuel injection pipe end-connections with 60 ° female cone
BS ISO 5675-2008	農業拖拉機和機械.通用快動液壓接頭	Agricultural tractors and machinery - General purpose quick-action hydraulic couplers
BS ISO 6149-4-2006	用于流體傳動和一般用途的管接頭.帶ISO 261米制螺紋和O形圈密封的油口和螺紋端頭.內外六角端口栓塞的尺寸、	Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Dimensions, design, test methods and requirements for external and internal hex port plugs
BS ISO 6162-1-2002	液壓傳動.帶對開夾或整體式法蘭夾的法蘭接頭以及公制或英制螺釘.在壓力為3,5MPa(35bar)至35MPa(350bar),DN1	Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
BS ISO 6162-2-2002	液壓傳動.帶對開夾或整體式法蘭夾的法蘭接頭以及公制或英制螺釘.在壓力為35MPa(350bar)至40MPa(400bar),DN1	Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51
BS ISO 6489-2-2002	農用車輛.被牽引和牽引車輛間的機械連接裝置.第2部分:40號 U型鉤接頭的規范	Agricultural vehicles - Mechanical connections between towed and towing vehicles - Specifications for clevis coupling 40
BS ISO 7169-2007	航空航天.液壓系統用24°錐形的、壓力范圍截至3000psi或21000kPa的可拆卸管接頭.采購規范(英制/米制)	Aerospace - Separable tube fittings for fluid systems, for 24 ° cones, for pressures up to 3000 psi or 21000 kPa - Procurement specification, inch/metric
BS ISO 7241-2-2000	液壓傳動.快換接頭.試驗方法	Hydraulic fluid power - Quick-action couplings - Test methods
BS ISO 7876-4-2005	燃油噴射裝置.詞匯.高壓管和末端接頭	Fuel injection equipment - Vocabulary - High-pressure pipes and end-connections
BS ISO 8267-1-2006	飛行器.牽引桿附屬接頭的接口要求.干線飛行器	Aircraft - Tow bar attachment fittings interface requirements - Main line aircraft
BS ISO 8267-2-2006	飛行器.牽引桿附屬接頭的接口要求.區域性飛行器	Aircraft - Tow bar attachment fittings interface requirements - Regional aircraft
BS ISO 8434-2-2007	液壓傳動和通用金屬管連接件.37°擴口管接頭	Metallic tube connections for fluid power and general use - 37 ° flared connectors
BS ISO 8434-3-2005	用于液壓傳動和一般用途的金屬管接頭.O形圈端面密封管接頭	Metallic tube connections for fluid power and general use - O-ring face seal connectors
BS SP 119 and SP 120-1957	航空用高強度鋼叉形接頭(統一螺紋)	High tensile steel fork joints (Unified threads) for aircraft
BS SP 33-39-1951	航空用旋轉套筒,、張力桿和型鍛鋼絲繩端面接頭規范	Specifications for turnbarrels, tension rods and swaged cable-end connections for aircraft
編號	中文名稱	英文名稱